The way to Connect a PS3 Controller a great XBox

Yes, those xbox 360 controller can be extremely annoying to use. Luckily, Xbox enthusiasts will use the Ps3 controller on Xbox 360 elite games instead. No, it's not magic, in fact it is not illegal. It becomes an ideal way to operate the PS3 controller while still enjoying Xbox 360 system games.



Instructions

1. Connect the XCM Cross Fire converter towards the Xbox 360 system. Connect the Xbox controller to the XCM Cross Fire converter's port.

2. Press the correct trigger or RT button situated on the Xbox 360 controller several times. Here is the shooting button in first-person shooting games. Lift the button labeled RT around the XCM Cross Fire converter by one level.

3. Press the RT button about the xbox 360 controllers one or two more times. Arise the RT button within the XCM converter once again. The button for the converter must be at the very top. Press the RT button for the Xbox 360 a few more times.

4. Unplug the Xbox controller from your converter. Plug the PS3 controller in the converter and press the R2 button located on the PS3 controller.

5. Rotate the correct analog affix the PS3 controller clockwise or counterclockwise once. Move the Tilt button about the XCM converter on the "R" level. Rotate the left analog stick and move the Tilt button on the converter to the "L" level.

How to Sync an Xbox Wireless Controller

Microsoft's Xbox 360 console is placed to speak with wireless controllers, although standard controllers work fine, too. In case you have recently acquired a radio controller, you will have to sync it in your Xbox 360 elite before you put it to use. The machine runs on the simple rf to get in touch; accomplishing this only requires a few moments, and the controller should stay synced till the battery requires replacement.

Instructions

1. Insert the batteries into xbox 360 wireless controller. Use two AA batteries or XBox rechargeable battery back. Remove the battery cover in the rear of the controller to put in the batteries.

2. Power on the controller as well as your system. Wait for a system to start up before trying to sync. Turn your controller on by holding the "Start" button.

3. Press the "Connect" button within the system. The connect button is found to the left with the power button.

4. Press he "Connect" button on your own controller; it's positioned on top of the controller. In the event the light flashes on the controller, it's synced.

5. Repeat the task to sync as much as four wireless controllers.