How you can Fix a PSP 2000: Cleaning it once a a Blank Screen but Its Bricked

Sony PSP 2000's may become bricked, or completely inoperable, when the device becomes corrupted after a software update. This situation can be seen when the PSP 2000 Case is started as well as the screen stays blank. Differently sending the device into Sony to help them to make it better, you may use what's termed as PSP service tool to reinstall the software program and find the PSP 2000 working once again.



Instructions

1. Position the PSP 2000 on its screen-side and remove it cover. This reveals the PSP 2000 battery. The battery pops out when pulling the most notable edge of it closer. Pull against eachother.

2. Insert the special moment memory stick to the PSP 2000's memory reader while using PSP 2000 turned off. Insert the service battery in to the PSP 2000, along with the PSP 2000 turns on. The service menu is displayed.

3. Press the "X" button to reinstall the PSP 2000 firmware. This is what un-bricks the PSP 2000. Press the "X" button to try and do the installation.

4. Wait for prompt from your installer to press the "X" button again to seal off of the PSP 2000, and press it. Wait for an PSP 2000 to shut off.

5. Press battery cover release button to get rid of the top's and extract of the service tool battery. Insert the default PSP 2000 Bag.

6. Turn the PSP 2000 on along with the screen will now change from completely blank to displaying the PSP 2000 welcome screen. jklzaeqc 1030