
Instructions
1. Get rid of the battery through the PSP to reveal four screws. Remove these screws and set those to the inside.
2. Remove two screws about the opposite end from the battery compartment and final screw at the base edge of the PSP. Place these three screws while using other four.
3. Gently pull the covers off of the PSP.
4. Put the new rear cover onto the PSP first, then the top cover. Snap the two covers into place.
5. Reattach the screws while using screwdriver and put the battery on the PSP. jklzaeqc 1031
没有评论:
发表评论