PSP Faceplate Tutorial

However , you might love your PSP 2000 Case, you won't need to love its faceplate. Unfortunately, the PSP's design doesn't support easy customization, and changing the faceplate isn't as simple as just popping an existing faceplate off. However, if you a mini-screwdriver set, you possibly can reprogram your PSP faceplate manually. But be warned: changing your PSP's faceplate will void your PSP's warranty, as you are should get it apart so that you can customize the faceplate.



Prepare the PSP
As with any major surgical process, you will have to prepare the patient adequately before proceeding. Because you'll be opening it up and exposing its internal parts, it is very important clean it thoroughly before opening it up. Start using a soft, damp cloth to take out any dust or particulates that may contaminate the medial side of the PSP 2000 Repair Parts. Also ensure that you remove any games in the UMD drive, the PSP's storage device, battery door along with the battery itself. jklzaeqc 1102

Take away the Old Faceplate
Put the PSP faced down on a flat working surface and employ a mini screwdriver to remove both the screws in the back of the PSP. Once these happen to be removed, you will note two more hidden within the battery plate plus the warranty sticker. Remove these at the same time. Set all four these screws aside. The PSP's analog nub can be loose. Lift up and remove each screws through the exposed analog unit. Then pull the actual PSP bully off to show the PSP's insides.

Assemble the brand new Faceplate
Grab your brand-new faceplate then screw the analog unit into the analog unit space. Then remove plastic face button covers in the exposed PSP and push them into their respective spaces within the new faceplate. Do exactly the same with the row of buttons at the base from the device.

Squeeze New Faceplate On
In fact the buttons are actually assembled about the new faceplate, it is time to use it the PSP. Simply put the faceplate above the PSP so gently transform it over to replace the 2 screws underneath the battery cover. Then placed the battery cover back on and replace both external screws. You now have a brand new faceplate on your PSP 2000 Housing Case.