Nintendo ds lite Complete Full Housing Shell Case

Product Features
Complete housing replacement set.
Made from top quality material for great fitment.
Hinge set also included.
Includes Ds by nintendo disassembly guide and screwdrivers.



Product Description
Envy of your respective friends new DS Lite? You will have that fresh examine a tiny part of the fee! Also comes filled with screws, shoulder button posts, and even the springs! Good quality color matched stylus with crystal tip included. Highly detailed ds case.

This item is made from Ideal quality, i am not saying anything bad in regards to the excellence of the HOUSING. The screws that they can give you are almost all exactly the same simply because they made the housing to utilize all the same screws. These screws break EXTREMELY easily, and will easily ruin the front of the bottom housing (Where all the screws screw into). Really the only other bad thing will be the D-pad. The D-pad seriously isn't meant to press the rubber button under that without smashing it down, so I ended up while using the original d-pad and also the original front bottom casing to ensure that I could use more often with the old screws. jklzaeqc 1121

Simply, it doesn't fit the Ds lite Lite. I've got broke my DS from wanting to fit this into it. This is a cheap, poorly-made little bit of crap, and is not a similar size because the original NDS Lite housing/casing.

This ds cases is absolute crap. I've done about 15-20 Ds lite Lite housing swaps, i haven't seen a housing that suits together as poorly since this one does. After assembly, every one of the panels had some movement to them. Small little indentations from the plastic that are created to support the WiFi and mic wires are so large, and retain the wires in any way. Almost no screws are usable, because the heads are far too wide to fit in most on the recessed holes. Both of my L and R button springs were wound too tightly, so that it is almost impossible to setup them.

I've ordered other housings because of this seller, but no time before the clear one. I definitely defintely won't be ordering this again. My customer wasn't satisfied with the complete excellence of the build, i am now forced to purchase another housing on my dime to switch this one. http://www.vdealbox.com/ds-accessories/ds-housing-shell-case.html

Replace a DS Shell

The shell over a Nintendo DS bag would be the name given to an arduous plastic case that protects the leading base unit from the console. Should you drop the DSi, by way of example, the shell will absorb the shock from the fall and protect the principle unit from damage. These shells are produced by third-party manufacturers. If you want to customize the shell on the DSi, that can be done in a short while.



Instructions

1. Switch off your Nintendo DSi with all the console's "Power" switch.

2. Open the lid on your Nintendo DS case.

3. Make use of a screwdriver to get rid of all of the screws holding your existing DSi shell together. The volume of screws you must remove is determined by any type of shell that you are using. This typically number will be between 6 and 10 screws.

4. Pull the very best the main shell off of the bottom level. Each pieces will separate. Get rid of the two items of the shell and hang them aside. jklzaeqc 1102

5. Place your Nintendo DSi inside bottom 1 / 2 your new shell. The shell includes a compilation of joints that allow it to spread out and close and also the lid with the DSi. Line the lid track of the DSi shell. Place the top half the shell on the bottom half. This half also features a similar joints that permit it to spread out and close while using lid of the DS Repair Parts.

6. Utilize screws included with your shell and also the screwdriver to install the most notable 50 % of the shell to the bottom half. When both areas of the shell are connected, the shell is properly installed.