The Nintendo dsi battery can be an upgrade towards original Ds lite released in 2004 by Nintendo. Besides dual screens as well as a bottom touch monitor, the Nintendo DSi also features two cameras offering additional capabilities for gamers. Unfortunately, only a few Nintendo DSi units have problems with a white screen effect that affects underneath DSi screen and renders it useless. In many instances you will have to replace the screen, and you can manage this process in case you lack any experience repairing Nintendo dsi charger.
Instructions
1. Go out your Nintendo DSi and power these devices back on. Confirm the bottom screen for virtually every continued whiteness. If your screen remains to be white and stays unusable, you simply must change it out entirely.
2. Get rid of the game cart from the surface of your device, if applicable. Get rid of the stylus on the top right stylus slot around the Nintendo DSi. Shut the display and turn the system over.
3. Get rid of the battery, that is situated on the back left with the tool and can be accessed by checking it compartment. Make sure the DSi is powered completely off before doing this.
4. Exclude the screws around the back from the Nintendo DSi Power Cords. You will discover seven screws here and every can be removed with a Phillips screwdriver.
5. Take off the rear cover. The cover will probably be loose and you will simply pry along its edges to it well and reveal the DSi's motherboard.
6. Locate several cables over the bottom edge with the Nintendo DSi's motherboard. Each one of the cables connects in to a black connector. Access gently and very slightly on each connector. Do not extract on each several millimeters, or they might break. With the connectors pulled upright, slide each cable over to disconnect it.
7. Eliminate the power wires for the device. These power wires are clustered at the bottom center with the motherboard where there're locked in place by one white connector. Extract gently on this connector to drag out of the power wires in a similar you suited for additional three connectors for the motherboard.
8. Remove the four screws about the motherboard in your Phillips screwdriver. There exists one lone screw from the top right corner on the motherboard. The opposite three are clustered around the left side from the motherboard.
9. Go ahead and take motherboard from the housing, such as the try and eliminate it completely because it is still connected by two cables. These two cables can be left as is. Lay the motherboard off to along side it with the DSi in order to access the screen beneath it.
10. Extract the underside screen. It really is loose which enable it to simply be pulled free. jklzaeqc 1102
11. Position the modern replacement bottom DSi screen within the housing of the gaming system. It'll slide in in which you removed the earlier screen.
12. Reassemble the Nintendo DSi by performing all of the disassembly levels in reverse. First turn on the ds lite repair parts.
没有评论:
发表评论